1300 000 734

Victron MultiPlus-II 2400W 48V Inverter/Charger


3kVA 48V Off-Grid and Grid-Connect Inverter/Charger

Availability: In stock

Click on image to zoom

More Views

The new 48V inverter/charger

The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid. It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A). It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals.

Note: for a short period of time this product was called MultiGrid-II.


The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

ESS: Energy Storage Systems

The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. For examples and more detailed information see the ESS Design & installation manual.

Uninterrupted AC power (UPS function)

In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.

Remote Monitoring and Control

Monitor and control your system locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and web portal. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Multi to auto starting a back generator and more...

Input Voltage 230 VAC
Input Frequency 50 Hz
Battery voltage (range) 38 - 66 VDC
Max. battery charging current 35 A
Max. efficiency (typical) 95 %
Consumption with no load (stand by) 11 W
Protection Rating IP 21
Ambient Temp. Range -40°C to +65°C (fan assisted)
Weight 20.30
WxHxD (mm) 268 x 499 x 141
Nominal DC Output (V) 48V
Continuous Power 2400 W
½ hour rating 3000 W
Surge rating (5 seconds) 5500 W
Output waveform Sinewave
AC Transfer Switch (Option) 32 A
Model Number on CEC List Series: "MultiPlus II" Model No: "MultiPlus-II 48/3000/35-32"

Ask a question about this product

Signupto RFI newsletter